烟气脱硫脱硝
Your current location : Home >> News >> Technical news

ContactContact Us

Shenyang Yuneng Mechanical Engineering Technology

Contact person for drying and calcining technology: Yu Zongchun (teacher)

Tel: 13904039686

Contact person of environmental protection and energy conservation technology: Jiang Baoyi (teacher)

Tel: 18102429424

Marketing Department Contact: Yu Lei (Manager)

Tel: 13080705497

Address: No. 8-19, Fumin South Street, Hunnan New District, Shenyang

Treatment measures for high temperature ignition of gear lubricating oil in gypsum calcining equipment

2022-09-16 10:37:14
a

Gypsum calcining equipment is a kind of calcining equipment with mature structure and convenient use. It can also be divided into ceramsite calcining kiln, cement calcining kiln, metallurgical calcining kiln and chemical calcining kiln according to different calcined materials. In recent years, with the vigorous development of industry and the progress of social construction in China, the sales of gypsum calcination equipment are also increasing year by year. So how can gypsum calcining equipment avoid high temperature ignition of gear lubricating oil? Here is a brief talk about how the gypsum calcining equipment can avoid the ignition of gear lubricating oil at high temperature. I hope it can be helpful to you.

Firstly, gypsum calcining equipment can be divided into lime kiln, cement kiln, ceramsite kiln, metallurgical and chemical kiln, etc. according to different materials. The temperature of gypsum calcining equipment is very high during operation. According to different materials, the temperature is generally 800-1050 ℃, and some special materials can even reach 1600 ℃.

Gypsum calcining equipment


Although the probability of the lubricating oil of the gypsum calcination equipment catching fire is very low, it will have a great impact on the safety of the gypsum calcination equipment, and may even affect the safety of the operators. It is actually possible to prevent and avoid gear lubricating oil from catching fire.

Generally, the reason for the fire of gear lubricating oil is that the lining of gypsum calcining equipment is thin or falling off, or the temperature increases due to friction, which causes the high temperature ignition of lubricating oil. At the same time, improper selection of lubricating oil and insufficient tolerance of lubricating oil to high temperature may also cause temperature rise, which may ignite the lubricating oil. In addition, improper use of gypsum calcining equipment during operation may also cause fire due to high temperature of lubricating oil. In case of fire, the fire extinguisher shall be inactivated first, and the machine shall be shut down for inspection. The machine shall be started for operation after the problem is determined to be eliminated.

In addition, the kiln lining shall be supplemented, better gear lubricating oil shall be selected, the kiln body shall be well sealed, rare leakage shall be prevented, and the sludge and oil dirt of the kiln body shall be cleaned regularly.

The above is how the gypsum calcination equipment can avoid the high temperature ignition of gear lubricating oil. I hope it can be helpful to friends who use gypsum calcination equipment.

Website of this article:http://en.syyntec.com/news/536.html

Shenyang Yuneng Mechanical Engineering Technology Co., Ltd

Contact person for drying and calcining technology: Yu Zongchun (teacher)

Tel: 13904039686

Contact person of environmental protection and energy conservation technology: Jiang Baoyi (teacher)

Tel: 18102429424

Marketing Department Contact: Yu Lei (Manager)

Tel: 13080705497

Address: No. 8-19, Fumin South Street, Hunnan New District, Shenyang

Copyright 2021 Shenyang Yuneng Mechanical Engineering Technology All rights reserved. Liao ICP No. 2021010103-1