Drying tower

Introduction:

The drying of the drying tower uses clean air heated by the heat exchanger as the drying medium, and adopts the drying and cooling technology of "more heat, more slow and one cold" (or more cold). After the dry air enters the drying tower, it will conduct sufficient moisture heat exchange with the materials, and the wet waste gas will be discharged out of the machine through the outlet pipe. After each drying section, a cooling section is set to facilitate the outward transfer of part of the moisture in the material and gradually balance the temperature gradient and humidity gradient. The cooling section can fully cool the dried materials for low temperature storage. Three anti rotation level indicators are installed in the storage section of the drying tower, which are used to automatically control the discharge motor of the drying tower (equipped with a stepless speed reducer) to achieve output adjustment. A thermoelectric coupling is installed in each drying section to measure the temperature in the tower at any time to prevent excessive temperature and drying of materials.

characteristic:

● The tower dryer has the advantages of high thermal efficiency, uniform temperature distribution, easy adjustment and no local overheating.

● The fuel in the equipment has no power flow, which is easy to operate and occupies a small area.

● The materials pass through the diversified drying area to achieve continuous, gentle and even moisture heat exchange.

● Adopt automatic control, and the residence time of materials in the tower can be adjusted at will. Through air flow control and movement of processed products, processed products can be dried evenly and thoroughly. The tower dryer is most suitable for slow and even drying.

Scope of application:

It is widely used for drying and cooling powdery, granular and rod-shaped materials in chemical industry, light industry, medicine, food, plastic, grain, slag, fertilizer, salt making, tobacco, sugar and other industries.